Product Features:
1. It is so adaptable that you can easily change the angle and mount it a few inches away from a building to get better lighting and keep the solar panel clear of gutters and overhangs.
2. When unfamiliar people enter your home, it can keep you safe. The recommended installation height is 6–14 feet, and the trigger range is 10–26 feet.
3. Effective solar energy systems and big batteries: A 20% conversion rate and more effective charging are features of the 6V 2.5W PET laminated solar panel found on the ENGREPO solar sensor lamp.
4. Continual illumination for three hours Three Modes: 1) Provides dim illumination at night and activates to full illumination when motion is detected. 2) is off until motion is detected, after which it turns on fully. 3) Three hours of non-stop lighting
5. Installing is as simple as pie. It only requires two fasteners to connect, and since it is entirely solar-powered, no cabling is required. The product can withstand extreme weather conditions like rain and snow thanks to the high-strength ABS case and IP65 waterproof level.
Product Specific：
| Power Supply | Solar |
| Light Source | LED |
| Support Dimmer | NO |
| Lifespan (hours) | 50000 |
| Working Time (hours) | 50000 |
| Product Weight（kg） | 3.5 |
| Item Type | Solar Street Lights 50w 100w 150w 200w 300w 400w 500w |
| Lamp Body Material | Aluminum Alloy |
Detailed Images:
When you turn the light on, the first mode is Dim Light with Sensor Mode; during the day, it will be off and charging, and at night, the 48 LED lights will be dim and illuminate to full brightness for 20 seconds if motion is detected. By pressing the button again, you can switch to Sensor Mode; during the day, it will be off and charging, and at night, it will turn on small side dim lights before illuminating to full brightness for two seconds. The light is turned off with one more push of the switch.
The solar cells must be kept clear in order to properly receive solar energy, just like any other solar-powered gadget. All that is necessary is regular solar panel cleaning.
To the right of the motion sensor is a solitary power switch; when pressed and held for three seconds, it turns on the light by flashing three times.
These lamps can be positioned in various places. The LED light source is 7.4" in length and 3.8" in width. The fixing arm, which stretches 7.5" from the surface you attach the light too, has a 180° horizontal adjustment range. The light's modification enables it to be turned 90 degrees either upward or downward.
Whether installed into solid timber or an empty wall that requires support, the package includes all the fastening tools you'll need. Selecting a location, noting the location of the mounting screws with a pencil while holding the mounting bracket in position, drilling 0.24-inch holes if installing into an empty wall, or simply screwing the bracket into place is all that is needed to attach it. Using the provided fasteners and screws, fasten the arm to the frame and the lamp to the arm.
Usage:
Easy And Fast Assembly:
1. It only needs two fasteners to be attached anywhere, and since it is all solar-powered, no cabling is needed.
2. It can be mounted a few centimeters away from the structure so that the solar panels receive improved illumination and are clear of overhangs and drains.
FAQ:
1. What about solar-powered lamps with motion sensors?
The best photovoltaic motion lights, to put it simply, are effective deterrents that work in any conditions. View the exterior solar lights listed below to improve your home's security, and take a look at some of our top picks to help you decide which set is ideal for your residence.
2. What are the different motion sensor led street light types?
Usually, either monocrystalline or polycrystalline solar cells are used for solar street illumination.
3. How long do motion sensor led street lights last?
Solar lamps typically operate for 6 to 10 hours each night and last between two and five years. Your solar lamps' lifespan might be extended if you store them indoors over the winter.